Vanity Mirror Illumination Inspection

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the sunvisor. (See SUNVISOR REMOVAL/INSTALLATION .)
Verify that the continuity between the vanity mirror illumination terminals is as indicated in the table.
- If not as indicated in the table, inspect the bulb. If there is no malfunction, replace the sunvisor.
Fig 1: Vanity Mirror Cover Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Vanity Mirror Connector Terminal
Courtesy of MAZDA MOTORS CORP.