Vanity Mirror Illumination Bulb Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Insert a tape-wrapped flathead screwdriver into the service hole, and pry it in the direction indicated by the arrow to remove the lens.

Fig 1: Removing Lens
Courtesy of MAZDA MOTORS CORP.
Remove the Vanity mirror illumination bulb.

Fig 2: Identifying Vanity Mirror Illumination Bulb

Courtesy of MAZDA MOTORS CORP.

Install in the reverse order of removal.