Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
Front,Both Sides		1.0		B
Rear,Both Sides.		1.0		B
Combination Procedure: CALIPER: Replace:
One	Includes: Bleed Brakes.	0.5		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing: NOTE: This operation does not apply to front rotors on FWD vehicles or rear rotors on RWD vehicles. If on vehicle refinishing is not possible use appropriate repair operation.
Front or Rear,Each		0.6		B
Combination Procedure: DISC ROTOR: Replace:
Front or Rear		0.4		B