LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 2 Sport, 1.5L Eng VIN Y, Automatic Trans >> Labor Times >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All,Both Axles2.2B
Front,Both Sides1.0B
Rear,Both Sides1.4B
Combination Procedure: CALIPER: Replace:
OneIncludes: Bleed Brakes.0.5B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing:
NOTE: This operation does not apply to front rotors on FWD vehicles or rear rotors on RWD vehicles. If on vehicle refinishing is not possible use appropriate repair operation.
Front,Each0.6B
Combination Procedure: DISC ROTOR: Replace:
Front0.4B
Combination Procedure: DRUM: Replace:
Each0.1B
Combination Procedure: WHEEL CYLINDER: Replace:
One0.5B