Procedures

POWERTRAIN/DRIVETRAIN MOUNT NEUTRALIZING

1. With the vehicle in NEUTRAL, position it on a hoist. See Lifting.

2. Loosen, but do not remove, the powertrain/drivetrain mount fasteners.

3. Lower the vehicle.

4. Start the vehicle and move it in forward 0.6-1.2 m (2-4 ft). Then move the vehicle in reverse the same distance.

CAUTION:Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.
5. Raise and support the vehicle.

6. Tighten the powertrain/drivetrain mount fasteners.

7. Lower the vehicle.

8. Test the system for normal operation.