LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control System [HVAC - Full Auto Air Conditioner) >> Ambient Temperature Sensor Removal/Installation [Full-Auto Air Conditioner]

Ambient Temperature Sensor Removal/Installation [Full-Auto Air Conditioner]

  1. Disconnect the negative battery cable.
  2. Remove the under cover.
  3. Remove in the order indicated in the table.
    PARTS DESCRIPTION CHART

    1 Ambient temperature sensor connector
    2 Ambient temperature sensor
  4. Install in the reverse order of removal.
    Fig 1: Ambient Temperature Sensor And Connector
    G07621389Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals