LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Fuel System [MZR 2.5]) >> Non-Return Valve Inspection

Non-Return Valve Inspection

WARNING: This page is about a different variant/trim than selected.
WARNING:
  • Fuel is very flammable liquid, if fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedure", while referring to the "BEFORE SERVICE PRECAUTION".
  1. Complete the "BEFORE SERVICE PRECAUTION". (See BEFORE SERVICE PRECAUTION .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .)
  3. Remove the fuel pump unit. (See FUEL PUMP UNIT REMOVAL/INSTALLATION .)
  4. Siphon the fuel from the fuel tank.
    NOTE:
    • Non-return valve is integrated in the fuel tank.
    • The non-return valve is normally closed by the spring force.
    • Verify the non-return valve operation using a mirror.
  5. Verify that the non-return valve is closed.
  6. Verify that the non-return valve is not stuck open and does not open even when pulled up by a finger.
Fig 1: Non-Return Valve Is Closed
G07620552Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals