LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Emission System [MZR 2.5]) >> Rollover Valve Removal/Installation

Rollover Valve Removal/Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The rollover valve cannot be removed as it is built into the fuel tank.
  1. Remove the fuel tank. (See FUEL TANK REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals