LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Emission System [MZR 2.5]) >> Purge Solenoid Valve Removal/Installation

Purge Solenoid Valve Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .)
  2. Remove in the order indicated in the table.
    PURGE SOLENOID VALVE REMOVAL REFERENCE CHART

    1 Connector
    2 Evaporative hose
    3 Purge solenoid valve
    4 Purge solenoid valve bracket
  3. Install in the reverse order of removal.
Fig 1: Exploded View Of Purge Solenoid Valve With Torque Specifications
G07620604Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals