LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Cooling System [MZR 2.5]) >> Radiator Removal/Installation >> Radiator Removal Note

Radiator Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the four bolts which secure the condenser to the radiator and set the condenser apart from the radiator.
  2. Remove the radiator from above the engine compartment.
Fig 1: Bolts Secure Condenser To Radiator
G07620463Courtesy of MAZDA MOTORS CORP.