LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Cooling System [MZR 2.5]) >> Cooling Fan Motor Removal/Installation >> ATF Oil Cooler Pipe Removal Note (ATX)

ATF Oil Cooler Pipe Removal Note (ATX)

WARNING: This page is about a different variant/trim than selected.
  1. Remove the ATF oil cooler pipe with the hoses still connected. Position the ATF oil cooler pipe so that it is out of the way.
scientia non olet · About LEMON Manuals