LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical [Intake-Air System MZR 2.5]) >> Intake-Air System Removal/Installation >> Intake Manifold Removal Note

Intake Manifold Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove fire aerodynamic under cover No. 2. (See AERODYNAMIC UNDER COVER NO. 2 REMOVAL/INSTALLATION .)
  2. Remove the coolant reserve tank. (See COOLANT RESERVE TANK REMOVAL/INSTALLATION .)
  3. Remove all clips for securing wiring harness from the intake manifold.
  4. Disconnect the vacuum hose connecting the intake manifold.
  5. Remove the fuel distributor and fuel injector a as single unit. (See FUEL INJECTOR REMOVAL/INSTALLATION .)
  6. Remove the intake manifold.
scientia non olet · About LEMON Manuals