LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical [Intake-Air System MZR 2.5]) >> Accelerator Pedal Removal/Installation

Accelerator Pedal Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .)
  2. Remove in the order indicated in the table.
    ACCELERATOR PEDAL COMPONENTS REMOVAL SEQUENCE

    1 APP sensor connector
    2 Accelerator pedal
  3. Install in the reverse order of removal.
Fig 1: Accelerator Pedal Components Removal Sequence
G07620518Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals