LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical [Lubrication System MZR 2.5]) >> Oil Cooler Removal/Installation >> Oil Cooler Installation Note

Oil Cooler Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Align one of the positioning tabs on the oil cooler as shown in the illustration to the oil filter adapter hole, and install the oil cooler.
Fig 1: Aligning One Of Positioning Tabs On Oil Cooler To Oil Filter Adapter Hole
G07625652Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals