LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical (Service Information MZR 2.5)) >> Timing Chain Removal/Installation >> Timing Chain Installation note

Timing Chain Installation note

WARNING: This page is about a different variant/trim than selected.
  1. Install the SST  to the camshaft as shown.
  2. Install the timing chain.
  3. Remove the retaining wire or paper clip from the auto tensioner to apply tension to the timing chain.
    Fig 1: Installing SST On Camshaft
    G06199782Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals