LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical (Service Information MZR 2.5)) >> Front Oil Seal Replacement >> Front Oil Seal Removal Note

Front Oil Seal Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Cut the oil seal lip using a utility knife.
  2. Remove the oil seal using a screwdriver wrapped with a rag.
    Fig 1: Removing Oil Seal Using Screwdriver
    G05543098Courtesy of MAZDA MOTORS CORP.