LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Manual Transaxle [Shift Mechanism]) >> Manual Transaxle Shift Mechanism Removal/Installation >> Selector Cable Installation Note

Selector Cable Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Make sure that the shift lever (transaxle side) is in neutral.
  2. Unlock the lock piece of the selector cable in the order shown in the illustration.
  3. Shift the sift lever to neutral.
    Fig 1: Lock Piece Unlocking Sequence
    G06205836Courtesy of MAZDA MOTORS CORP.
  4. Lock the lock piece of the selector cable in the illustration.
  5. Shift the shift lever from neutral to other position, and make sure that there are no other components in that area to interfere with the lever.
Fig 2: Lock Piece And Selector Cable Locking Position
G06205836Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals