LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mazda
>>
2011
>>
6 s Touring Plus
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 2 (Engine Control System [MZR 2.5])
>>
Pcm Inspection
>>
Inspection Using An Oscilloscope (Reference)
>>
Generator field coil control signal
Generator field coil control signal
WARNING:
This page is about a different variant/trim than selected.
PCM terminals
2AA(+)-body ground(-)
Oscilloscope setting
0.5 V/DIV (Y), 2 ms/DIV (X), DC range
Vehicle condition
Idle (after warm up)
Fig 1: Display Generator Field Coil Control Signal
Courtesy of MAZDA MOTORS CORP.
Courtesy of MAZDA MOTORS CORP.