No. 24 Engine Stalls When Shifted To D, M Or In R Position: Notes
WARNING: This page is about a different variant/trim than selected.
DESCRIPTION AND POSSIBLE CAUSE
| 24 |
Engine stalls when shifted to D, M or in R position |
| DESCRIPTION |
- Engine stalls when shifting from N or P position to D, M or R position at idle.
|
| POSSIBLE CAUSE |
- The malfunction is on the engine control side (i.e. electronic throttle control system). Otherwise, the malfunction is in the input/turbine speed sensor (engine sometimes starts) or the TCC circuit (engine always stalls).
|