Starter Installation Note

WARNING: This page is about a different variant/trim than selected.

NOTE:

If the insulator is peeling or damaged, attach a new insulator using the following procedure:

Peel off the insulator from the starter completely using a scraper.

Fig 1: Insulator Peeling Area Of Starter
Courtesy of MAZDA MOTORS CORP.
Degrease the insulator attachment area.

Fig 2: Insulator Attachment Area Of Starter
Courtesy of MAZDA MOTORS CORP.
Attach a new insulator to the starter.

Fig 3: Insulator On Starter
Courtesy of MAZDA MOTORS CORP.