LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Automatic Transaxle (Service, Removal & Installation FS5A-El)) >> Automatic Transaxle Removal/Installation >> Transaxle Removal Note

Transaxle Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Adjust the SST (49 C017 5A0)  and lean the engine toward the transaxle.
    Fig 1: Leaning Engine Toward Transaxle Using SST
    G07625918Courtesy of MAZDA MOTORS CORP.
  2. Support the transaxle on a jack.
  3. Remove the transaxle mounting bolts.
  4. Remove the transaxle.
    Fig 2: Supporting Transaxle On Jack
    G07625919Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals