LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Automatic Transaxle (Service, Removal & Installation FS5A-El)) >> Automatic Transaxle Removal/Installation >> Torque Converter Installation Nuts Removal Note

Torque Converter Installation Nuts Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Hold the crankshaft pulley to prevent drive plate from rotating.
    Fig 1: Removing Torque Converter Installation Nuts
    G07625916Courtesy of MAZDA MOTORS CORP.
  2. Remove the torque converter nuts from the starter installation hole.
    Fig 2: Locating Converter Nuts And Starter Installation Hole
    G07625917Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals