LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (On-Board Diagnostic [Automatic Transaxle F5SA-El]) >> On-Board Diagnostic System DTC Inspection >> Clearing DTCs Procedure

Clearing DTCs Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "TCM".
  3. Verify the DTC according to the directions on the M-MDS screen.
  4. Press the clear button on the DTC screen to clear the DTC.
Fig 1: DLC-2
G06200045Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals