DTC P0894:00: Notes
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION CHART
| DTC P0894:00 |
Transaxle component slipping |
| DETECTION CONDITION |
- The TCM detects that turbine revolution is 187.5 rpm or more for 3 s when the when the following conditions are met.
- D or M position
- Accelerator pedal position: released
- Brake pedal position: depressed
- Vehicle speed: 0 km/h {0 mph}
Diagnostic support note
- The MIL does not illuminate.
- The AT warning light illuminates.
- PENDING CODE is not available.
- FREEZE FRAME DATA is not available.
- The DTC is stored in the TCM memory.
|
| POSSIBLE CAUSE |
- Shift solenoid A malfunction
- Forward clutch not engaged or slipped
- TCM malfunction
|