LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (On-Board Diagnostic [Automatic Transaxle F5SA-El]) >> DTC P0744:00 >> Notes

DTC P0744:00: Notes

WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION CHART

DTC P0744:00 TCC slip control malfunction
DETECTION CONDITION 
  • The TCM detects that revolution ratio of the input revolution to output revolution in 3GR is 1.09 or more or 0.91 or less for 100 ms.
  • The TCM detects that revolution ratio of the input revolution to output revolution in 4GR is 0.785 or more or 0.605 or less for 100 ms.
Diagnostic support note 
  • The MIL does not illuminate.
  • The AT warning light illuminates.
  • PENDING CODE is not available.
  • FREEZE FRAME DATA is not available.
  • The DTC is stored in the TCM memory.
POSSIBLE CAUSE 
  • Solenoid valve malfunction
    • Shift solenoid A
    • Shift solenoid D
    • Shift solenoid E
  • Forward clutch not engaged or slipped
  • TCM malfunction