DTC P0735:00: Notes
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION CHART
| DTC P0735:00 |
Gear 5 incorrect ratio |
| DETECTION CONDITION |
- The TCM detects that revolution ratio of the intermediate revolution to output revolution is 1.11 or less for 5 s when the following conditions are met.
- 3GR or 4GR
- Accelerator pedal position: 4.67% or more
- The TCM detects that revolution ratio of the intermediate revolution to output revolution is 1.11 or more for 5 s when the following conditions are met.
- 5GR
- Accelerator pedal position: 4.67% or more
Diagnostic support note
- The MIL does not illuminate.
- The AT warning light illuminates.
- PENDING CODE is not available.
- FREEZE FRAME DATA is not available.
- The DTC is stored in the TCM memory.
|
| POSSIBLE CAUSE |
- Deteriorated ATF
- ATF level low
- Solenoid valve malfunction
- Pressure control solenoid B
- Shift solenoid F
- Line pressure malfunction
- Stall speed malfunction
- Direct clutch slipping
- Reduction brake slipping
- Secondary control valve body malfunction
- TCM malfunction
|