LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Exhaust System [MZR 2.5]) >> Exhaust System Removal/Installation >> Seal Ring Removal Note

Seal Ring Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the seal ring using a flathead screwdriver being careful not to damage the pipe.
    Fig 1: Removing Seal Ring Using Flathead Screwdriver
    G07620577Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals