LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Ignition System [MZR 2.5]) >> Spark Plug Inspection >> Resistance Inspection

Resistance Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Measure the resistance of the spark plug using a tester as shown in the illustration.
    • If not within specification, replace the spark plug.

Spark plug resistance [25°C {77 °F}] 

3.0-7.5 kilohms 

Fig 1: Measuring Resistance Of Spark Plug Using Tester
G07620664Courtesy of MAZDA MOTORS CORP.