LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (On-Board Diagnostic [Engine Control System MZR 2.5]) >> On-Board Diagnostic Test >> Diagnostic Monitoring Test Results Access Procedure

Diagnostic Monitoring Test Results Access Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Powertrain".
    2. Select "OBD Test Modes".
    3. Select "Mode 6 On-Board Test Results".
  3. Verify the diagnostic monitoring test result according to the directions on the IDS screen.
    Fig 1: DLC-2
    G06199562Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals