LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Conventional Brake System >> Brake Switch Inspection

Brake Switch Inspection

CAUTION:
  • Inspect the brake switch with it installed to the brake pedal, otherwise the brake switch may not operate normally. If the brake switch is removed from the brake pedal, replace the brake switch with a new one.
  1. Disconnect the brake switch connector.
  2. Verify that the continuity is as indicated in the table.
    Fig 1: Brake Switch Connector Terminal Continuity Chart
    G07621107Courtesy of MAZDA MOTORS CORP.
    Fig 2: Brake Switch Connector Terminal
    G07621108Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals