LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Rear Seat Cushion Removal/Installation

Rear Seat Cushion Removal/Installation

  1. Detach the hooks from the grommets by putting the rear seat cushion in the direction of the arrow shown in the illustration.
    Fig 1: Hooks, Grommets And Rear Seat Cushion Pulling Direction
    G07622010Courtesy of MAZDA MOTORS CORP.
  2. From the backside of the seat, detach the hook in the direction of arrow (1) shown in the illustration, then remove the rear seat cushion by pulling it in the direction of arrow (2).
  3. Install in the reverse order of removal.
    Fig 2: Hook Detach Direction And Rear Seat Cushion Pulling Direction
    G07622011Courtesy of MAZDA MOTORS CORP.