No. 3 Abs Warning Light Illuminates [Instrument Cluster]: Notes
POSSIBLE CAUSE CONDITION CHART
| 3 |
ABS warning light illuminates |
| POSSIBLE CAUSE |
- DSC HU/CM malfunction
- DSC HU/CM stores DTC
- Instrument cluster malfunction
- Connector or pin malfunction
- Short circuit in wiring harness between CAN-L, CAN-H and ground
- Open circuit in CAN wiring harness (CAN-L, CAN-H)
- CAN wiring harness (CAN-L, CAN-H) short each other
- Instrument cluster and DSC HU/CM configuration data do not coincide
- ? Instrument cluster configuration incomplete or in error
|