DTC U2005:86 [Instrument Cluster]: Notes

DTC U2005:86 [INSTRUMENT CLUSTER] DETECTION CONDITIONS & POSSIBLE CAUSES

DESCRIPTION	Signal error from PCM
DETECTION CONDITION	Instrument cluster detects invalid vehicle speed from PCM under the following conditions: Passed 20 s after switch the ignition to ON Odometer is normal and more than 30 km/h {19 mph} Battery voltage is more than 10 V Received invalid data from PCM for 1 s
POSSIBLE CAUSE	PCM malfunction Instrument cluster malfunction

DESCRIPTION

Signal error from PCM

DETECTION CONDITION

Instrument cluster detects invalid vehicle speed from PCM under the following conditions:

POSSIBLE CAUSE