Instrument Cluster

Connect the M-MDS (IDS) to the DLC-2.
After the vehicle is identified, select the following items from the initialization screen of the EDS.
1. Select the "Module Programming".
Then, select items from the screen menu in the following order.
1. Select "Programmable Parameters".
2. Select "Warning Lamps/Chimes".
Select an item name, and then select option.

Fig 1: DLC-2 Location

G07622516

Courtesy of MAZDA MOTORS CORP.

M-MDS FUNCTION CHART

M-MDS display	Function	Initial setting	Setting content	Control unit
Welcome Mode	The welcome mode can be set to operable or inoperable.	Enabled	Disabled/Enabled	Instrument cluster
Outside Air Temperature	The ambient temperature display unit can be changed.	Fahrenheit	Celsius/Fahrenheit	Instrument cluster
Decoration Illumination	The instrument cluster illumination can be set to operable or inoperable.	Disabled	Disabled/Enabled	Installment cluster
Headlamp reminder buzzer	The headlights-on reminder warning alarm can be set to operable or inoperable.	Disabled	Disabled/Enabled	Instrument cluster
Turn signal buzzer volume	The turn indicator beeper sound volume can be adjusted.	Normal	Normal/Small	Instrument cluster

CAUTION:

The M-MDS screen displays the following items, however, do not change the setting. If the setting is changed, a difference occurs between the instrument cluster indication and actual fuel level leading to unexpected fuel shortage.

M-MDS FUNCTION CHART

M-MDS display	Function	Initial setting	Setting content	Control unit
Fuel Response Data	The response timing of the remaining distance to empty corresponding to the remaining fuel can be selected.	Level 6	Level 1-16	Instrument cluster