Using the M-MDS
- Connect the M-MDS (IDS) to the DLC-2.
- After the vehicle is identified, select the following items from the initialization screen of the IDS.
- When using the IDS (laptop PC)
- Select "DataLogger".
- Select "Modules".
- Select "IC".
- Verify that it is displayed according to the table using "SPDMTR".
- If the speedometer does not move or the indication is not within the allowable range, inspect the related wiring harnesses.
- If the related wiring harnesses are normal, replace the instrument cluster.
M-MDS FUNCTION CHART
| M-MDS display | instrument cluster display |
| 60km/h | Speedometer gauge needle moves to approx. 60 km/h {37 mph} |
| 120km/h | Speedometer gauge needle moves to approx. 120 km/h {75 mph} |
| Off | Speedometer gauge needle moves to 0 km/h {0 mph} |