LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 L4-2.5L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Wiper and Washer Systems >> Wiper Switch >> Service and Repair >> Removal and Replacement >> Wiper And Washer Switch Removal/Installation

Wiper And Washer Switch Removal/Installation




WIPER AND WASHER SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the column cover. Service and Repair

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.

scientia non olet · About LEMON Manuals