LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 L4-2.5L >> Repair and Diagnosis >> Lighting and Horns >> Sensors and Switches - Lighting and Horns >> Headlamp Switch >> Service and Repair >> Light Switch Removal/Installation

Light Switch Removal/Installation




LIGHT SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the column cover. Service and Repair

3. Disconnect the connector.






4. Remove the screws shown in the figure, then remove the light switch by pulling it in the direction of the arrow.

5. Install in the reverse order of removal.

scientia non olet · About LEMON Manuals