LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 3 L4-2.0L >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Column >> Steering Column Lock >> Testing and Inspection >> Component Tests and General Diagnostics

Component Tests and General Diagnostics




STEERING LOCK UNIT INSPECTION [WITH ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]

1. Remove the column cover. Service and Repair

2. Measure each terminal voltage under the measurement condition.

- If the voltage is not as specified in the terminal voltage table, inspect the parts under "Inspection item(s)".

3. If the system does not work normally even though the inspection items are normal, replace the steering lock unit.

Terminal Voltage Table (Reference)





Terminal Voltage Table (Reference):




scientia non olet · About LEMON Manuals