Carpet: Service and Repair

FLOOR COVERING REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Front seat Removal and Replacement

b. Audio amplifier (Vehicles with Bose(R)) Service and Repair

c. Front scuff plate Front Scuff Plate Removal/Installation

d. Joint cover Steering Wheel And Column Removal/Installation - Without Advanced Keyless Entry And Push Button Start System Steering Wheel And Column Removal/Installation - With Advanced Keyless Entry And Push Button Start System

e. Front side trim Front Side Trim Removal/Installation

f. Fuel-filler lid opener lever bezel Fuel-Filler Lid Opener Bezel Removal/Installation

g. Selector lever knob (ATX) Automatic Transaxle Shift Mechanism Removal/Installation)

h. Shift lever knob (MTX) Service and Repair

i. Upper panel Upper Panel Removal/Installation

j. Shift panel Shift Panel Removal/Installation

k. Side wall Side Wall Removal/Installation

l. Console Console Removal/Installation

m. Rear scuff plate Rear Scuff Plate Removal/Installation

n. Lower anchor of the front seat belt Front Seat Belt Removal/Installation

o. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

p. Rear seat cushion Rear Seat Cushion Removal/Installation

q. Tire house trim Tire House Trim Removal/Installation

3. Remove fasteners A and B.






4. Take the floor covering out from the opened door.

5. Install in the reverse order of removal.