LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> B4000 Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center [Instrumentation/Driver Info] >> Key-In-Ignition Warning Switch >> Removal and Installation

Removal and Installation

  1. Remove the ignition lock cylinder. See Ignition Lock Cylinder - Functional or see Ignition Lock Cylinder - Non Functional .
    Fig 1: Identifying Key-In-Ignition Warning Switch
    G04310579Courtesy of MAZDA MOTORS CORP.
  2. Remove the key-in-ignition warning switch.
    1. Pry the clip downward.
    2. Release the key-in-ignition warning switch from the rear of the ignition lock cylinder.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals