Air Cleaner Outlet Tube Removal / Installation - 4.0L

WARNING: This page is about a different car, the 2009 Mazda B4000. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the crankcase ventilation tube and remove the mass airflow (MAF) sensor wiring harness push-pin.

Fig 1: Locating Crankcase Ventilation Tube And Mass Airflow (MAF) Sensor Wiring Harness Push-Pin
Courtesy of MAZDA MOTORS CORP.
Loosen the hose clamps and remove the air cleaner outlet pipe.

Fig 2: Hose Clamps And Air Cleaner Outlet Pipe Bolts With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
NOTE:
- Visually check the engine air cleaner intake duct and outlet tube for any foreign objects, obstructions or punctures.
To install, reverse the removal procedure.