LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> B2300 Standard >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Cooling System [2.3L] >> Radiator Pressure Test Inspection - 2.3L

Radiator Pressure Test Inspection - 2.3L

  1. Remove the radiator cap. Fill the radiator as needed. Connect a radiator tester (commercially available) to the radiator filler neck.
    CAUTION:
    • Do not pressurize the cooling system beyond 138 kPa (20.0 psi).
  2. Pump the cooling system to a maximum of 138 kPa (20.0 psi) and hold for 2 minutes. If the pressure drops within this time, inspect for leaks and repair as required.
scientia non olet · About LEMON Manuals