Backup Lamp Switch: Service and Repair

BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [G66M-R]

1. Disconnect the negative battery cable.

2. Remove the aerodynamic under cover No.2. Aerodynamic Under Cover No.2 Removal/Installation

3. Drain the oil from the transaxle.

4. Disconnect the back-up light switch connector and remove the back-up light switch.






5. Install in the reverse order of removal.

6. Add the specified amount and type of oil. Transaxle Oil Replacement [G66M-R]

7. Install the aerodynamic under cover No.2. Aerodynamic Under Cover No.2 Removal/Installation