LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> B4000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 609 (Engine Mechanical [Service Information 2.3L]) >> Drive Belt Removal / Installation - 2.3L

Drive Belt Removal / Installation - 2.3L

WARNING: This page is about a different car, the 2008 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Drive Belt Tensioner
G04929111Courtesy of MAZDA MOTORS CORP.
  1. Rotate the belt tensioner counterclockwise and remove the drive belt.
    NOTE:
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals