Air Cleaner Outlet Pipe Removal / Installation - 2.3L

WARNING: This page is about a different car, the 2008 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery. See BATTERY DISCONNECT .
Remove the accelerator control splash shield.

Fig 1: Accelerator Control Splash Shield Bolts With Torque Specification
Courtesy of MAZDA MOTORS CORP.
Disconnect the electrical harness push pins, the brake booster vacuum hose and the crankcase ventilation tube quick connect coupling.

Fig 2: Locating Push Pins, Brake Booster Vacuum Hose And Crankcase Ventilation Tube Quick Connect Coupling
Courtesy of MAZDA MOTORS CORP.
Loosen the 2 hose clamps and the air cleaner outlet pipe.
Tightening torque: 3 Nm {0.3 kgf-m, 27 in-lbf}
To install, reverse the removal procedure.