Engine Air Cleaner Removal / Installation - 4.0L

Loosen the clamp and disconnect the engine air cleaner (ACL) outlet pipe from the air cleaner outlet
Tightening torque:

3 Nm {0.3 kgf-m, 27 in-lbf}
Disconnect the mass air flow (MAF) sensor electrical connector.
NOTE:
- Pry the ACL from the base.
Remove the ACL assembly.

Fig 1: Prying ACL Assembly From Base
Courtesy of MAZDA MOTORS CORP.
NOTE:
- Clean the engine air cleaner with a dry, clean cloth.
To install, reverse the removal procedure.