LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 6 V6-3.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Clutch >> Clutch Hydraulic System >> Clutch Slave Cylinder >> Service and Repair >> Removal and Replacement

Removal and Replacement

CLUTCH RELEASE CYLINDER REMOVAL/INSTALLATION [G35M-R, A65M-R]
1. Remove the under cover.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.

G35M-R manual transaxle models





A65M-R manual transaxle models




scientia non olet · About LEMON Manuals