LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 5 L4-2.3L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Testing and Inspection

Drive Belt Tensioner: Testing and Inspection

DRIVE BELT AUTO TENSIONER INSPECTION [L3]

1. Remove the drive belt.





2. Verify that the generator drive belt auto tensioner moves smoothly in the operational direction.
^ If it does not move smoothly, replace the generator drive belt auto tensioner.
3. Turn the generator drive belt auto tensioner pulley by hand and verify that it rotates smoothly.
^ If it does not move smoothly, replace the generator drive belt auto tensioner.
4. Install the generator drive belt.

scientia non olet · About LEMON Manuals