LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 3 L4-2.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Antilock Brake System >> No.5 ABS Warning Light Stays on 4 S or More When the Ignition Switch Is Turned to the on Position [ABS]

No.5 ABS Warning Light Stays on 4 S or More When the Ignition Switch Is Turned to the on Position [ABS]

NO.5 ABS WARNING LIGHT STAYS ON 4 S OR MORE WHEN THE IGNITION SWITCH IS TURNED TO THE ON POSITION [ABS]

No.5 ABS Warning Light Stays on 4 S or More When the Ignition Switch Is Turned to the on Position [ABS]:





Diagnostic procedure

Step 1-Step 5:





^ When performing an asterisked ( ) troubleshooting inspection, slightly shake the wiring harness and connectors while performing the inspection to discover whether poor contact points are the cause of any intermittent malfunction. If there is a problem, verify that the connectors, terminals and wiring harness are connected correctly and undamaged.