LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> Mazdaspeed3 L4-2.3L Turbo >> Repair and Diagnosis >> Lighting and Horns >> Sensors and Switches - Lighting and Horns >> Backup Lamp Switch >> Service and Repair

Backup Lamp Switch: Service and Repair

BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the under cover.




3. Disconnect the back-up light switch connector and remove the back-up light switch.
4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals